FIRE & BLAST
Product | View Product Data Sheet | Configurations | Security | Environment | Fire & Blast | Maximum Dimensions W x H (m) | ||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Type | Operation | Schematic | Attack Delay | Anti-Ram (PAS68 amended) | Ballistic | Acoustic | Thermal | Flood | Pressure | Fire | Blast | |||
FIRE & BLAST PRODUCTS | ||||||||||||||
Rhino-HF PD05 | VIEW > | Hinged | Inward or outward opening | ✓ | 240 minutes integrity | ✓ | 2.6 x 2.9 | |||||||
Rhino-HF+234 PD06 | VIEW > | Hinged | Outward opening | LPS1175 up to SR4 | ✓ | 240 minutes integrity | ✓ | 2.6 x 2.9 | ||||||
Rhino-Multi-Performance / Oversize PD09 | VIEW > | Hinged or sliding | Multiple options | ✓ - multiple options | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | To suit application | |
Rhino-Rail Infrastructure PD10 | VIEW > | Hinged or sliding | Multiple options | ✓ - multiple options | Up to Rw 53dB | ✓ | ✓ | Up to 120 minutes | ✓ | To suit application | ||||
Rhino-HBL-SBL PD11 | VIEW > | Hinged or sliding | Multiple options | ✓ | To over 15 bar | To suit application | ||||||||
Rhino-FD90HL PD14 | VIEW > | Hinged | Inward or outward opening | ✓ | 90 minutes integrity | ✓ | 4.0 x 2.6 | |||||||
Rhino-FD120HL PD15 | VIEW > | Hinged | Inward or outward opening | ✓ | 120 minutes integrity | ✓ | 2.1 x 2.1 | |||||||
Rhino-FD90SLP PD16 | VIEW > | Sliding | One way | ✓ | Up to 90 minutes integrity | ✓ | 1.1 x 2.1 | |||||||
Rhino-FDi90HL PD17 | VIEW > | Hinged | Inward or outward opening | ✓ | ✓ | ✓ | 90 minute integrity and insulation | ✓ | 2.8 x 3.1 | |||||
Rhino-HCFD-60 PD18 | VIEW > | Hinged | Outward opening | NPSA Base or Enhanced | G2/FB4 | Up to Rw 43dB | ✓ | 60 minutes integrity, 30 minutes insulation | ✓ - C15 | 2.6 x 2.3 | ||||
Rhino-HLFD60 PD24 | New Product - Launching soon... | |||||||||||||
Rhino-HF45S PD25 | New Product - Launching soon... |
Rhino-HF Hinged Fire door
- Tested and rated up E240 (integrity) to EN1634-1, Certifire third-party certified and Fire Test House assessed for leaf areas of up 3.95m²
- Single, unequal, double leaf and latch-less configurations, with glazing, and optional over panels and side panels
Rhino-HF Hinged Fire door PD05
Rhino-HF+ Hinged Fire Door with LPS 1175 Security Ratings as Standard
- Tested and rated up E240 (integrity) to EN1634-1, Certifire third-party certified and Fire Test House assessed for leaf areas of up 3.95m²
- Tested and certified to LPS 1175 physical attack levels SR2, SR3 and SR4 (three products)
- Single, unequal and double leaf configurations, with optional glazing, over panels and side panels
- Optional project-specific blast and air pressure resistance ratings supported by independently verifiable calculations
Rhino-HF+2/3/4 Hinged Fire Rated Door with SR2/3/4 Rating PD06
Multi-Performance/Oversize Hinged and Sliding Doors
- Purpose designed hinged (fixed panel) and sliding doors for structural openings up to 6m wide by 6m high in single and double leaf configurations
- Fire rated by project specific assessment (Test House) up to E120 (integrity) to EN1634-1
- LPS 1175 security rated by project specific assessment
Acoustic tested to ISO 10140-2 and rated up to RW 55dB to ISO 717-1 - Project specific low-level blast and static air pressure resistant, supported by independently verifiable calculations
Multi-Performance/Oversize Doors PD09
Pressure Resistant Fire Doors for Tunnels and Sub-Surface Rail Stations
- Hinged (fixed panel) single and double leaf doors
- Fire Test House assessed for up to E120 (integrity) to EN 1634-1
- Project specific blast, static and piston pressure resistant supported by independently verifiable calculations
- Acoustic tested to ISO 10140-2 and rated up to RW 55dB to ISO 717-1
Pressure Resistant Fire Doors for Tunnels and Sub-Surface Rail Stations PD10
High-Level Blast Resistance and Radiation Shielding Hinged and Sliding Doors
- Side hinged and sliding, single and double leaf configurations up to 6m wide by 6m high
- Blast rated by project specific, independently verifiable calculations to levels up to 5 Bar
- Radiation shielded supported with project specific calculation
High Level Blast Resistance and Radiation Shielding Hinged and Sliding Doors PD11
Rhino Hinged, Latchless E90 Fire Doors
- A 90 minute integrity fire door, tested in accordance with EN1364-1
- Single swing configuration, available as single leaf, double leaf and unequal leaf.
- Clear openings up to 4,000mm wide x 2,640mm high. · Latch less design (no panic bar required).
- Standard smoke leakage control to EN1634-3 (<3.0m3/m/h @ 25Pa.
- Optionally available with ‘normally held open’ function.
- Flush leading edges (no rebate or astragal) allowing independent leaf operation.
- Available with or without vision panels.
- Manufactured in either stainless steel or carbon steel.
Rhino Hinged, Latchless E90 Fire Doors PD14
Rhino Hinged, Latched E120 Doors
- A 120 minute integrity fire door, tested in accordance with EN1364-1
- · Single swing configuration, available as single leaf, double leaf and unequal leaf.
- · Clear openings up to 2,120mm wide x 2,1000mm high.
- Concealed panic bar mechanism.
- Optionally available with ‘normally held open’ function.
- Flush leading edges (no rebate or astragal) allowing independent leaf operation.
- Available with or without vision panels.
- Manufactured in either stainless steel or carbon steel.
Rhino Hinged, Latchless E120 Doors PD15
Rhino Sliding Pressure and E90 Fire Resistant Doors
- A 90 minute integrity fire door, tested in accordance with NFPA-252.
- Single leaf, sliding configuration – self closing.
- Clear openings up to 1,120mm wide x 2,1000mm high.
- Latch-less design.
- Optionally available with ‘normally held open’ function.
- Capable of withstanding reciprocating pressures in excess of +/- 7.5kPa (both sides).
- Fatigue loading in excess of 106 cycles per year, + 25 year design life.
- Manufactured in carbon steel.
Rhino Sliding Pressure and E90 Fire Resistant Doors PD16
Rhino Hinged, Latched FD60, Fire and NPSA (formerly CPNI)
- A 60 minute integrity and 30 minute insulation fire door, tested in accordance with EN1634-1
- Variant of the standard Rhino-HC high security door.
- Primarily a high security attack delay door tested to UK Government NPSA (formerly CPNI) Enhanced level.
- Single swing configuration, available as single leaf, double leaf and unequal leaf.
- Clear openings up to 2,600mm wide x 2,300mm high
- High security locking system.
- Manufactured in carbon steel.
Rhino Hinged, Latched FD60, Fire and CPNI PD18
Rhino Hinged, Latched EI90 Fire Door
- A 90-minute integrity and insulation fire door, tested in accordance with EN1364-1.
- Superior radiated heat reduction performance.
- Single swing configuration, available as single leaf, double leaf and unequal leaf.
- Clear openings up to 2,862mm wide x 3,100mm high.
- Rebated leading edge with astragal.
- Available with or without vision panels.
- Manufactured in either stainless steel or carbon steel.
RHINO-FDi90HL PD17
OUR NEWSLETTER
Stay in the loop on the latest Rhino Doors news and insights
By submitting your email address you are consenting to Rhino Systems sending you periodic email newsletters about Rhino Systems. You can unsubscribe at any time.
CONTACT US
If you would like us to get in touch please leave your email address below
By submitting your email you are consenting for one of the Rhino sales team to make contact via email.