Multi Performance

Arch Profile Blast Rated Fire Walls, Explosion Relief Panels and Personnel Escape Tunnels for O&G Installations and Vessels

  • Patented design, blast rated by project-specific independently verifiable calculations
  • Fire-rated up to H120 hydrocarbon test standard
  • Blast walls available up to 10m high
  • Stainless steel Explosion Relief Panels available as fabricated cassettes or in kit form
  • Fire and blast resistant escape tunnels
  • Explosion Relief Panels LEARN MORE
  • Fire Rated Blast Walls & Escape Tunnels for O&G Installations LEARN MORE

Rhino-WT+ Flood Proof Door

  • Tested to 870mm head of water to PAS 1188-1: 2014 flood protection standard
  • Tested and certified to LPS 1175 physical attack levels SR2, SR3 and SR4 (three products)
  • Hinged, (outward opening only) single, unequal and double leaf configurations with optional over panels
  • Rhino-WT+2/3/4 Hinged Flood Door with SR2/3/4 Rating LEARN MORE

Multi-Performance/Oversize Hinged and Sliding Doors

  • Purpose designed hinged (fixed panel) and sliding doors for structural openings up to 6m wide by 6m high in single and double leaf configurations
  • Fire rated by project specific assessment (Test House) up to E120 (integrity) to EN1634-1
  • LPS 1175 security rated by project specific assessment
  • Acoustic tested to ISO 10140-2 and rated up to RW 55dB to ISO 717-1
  • Project specific low-level blast and static air pressure resistant, supported by independently verifiable calculations

Pressure Resistant Fire Doors for Tunnels and Sub-Surface Rail Stations

  • Hinged (fixed panel) single and double leaf doors
  • Fire Test House assessed for up to E120 (integrity) to EN 1634-1
  • Project specific blast, static and piston pressure resistant supported by independently verifiable calculations
  • Acoustic tested to ISO 10140-2 and rated up to RW 55dB to ISO 717-1
  • Pressure Resistant Fire Doors for Tunnels and Sub-Surface Rail Stations LEARN MORE
  • Case Study – High Acoustic Attenuation Tunnel Vent Fan Room Doors LEARN MORE

Rhino Sliding Pressure and E90 Fire Resistant Doors

  • A 90 minute integrity fire door, tested in accordance with NFPA-252.
  • Single leaf, sliding configuration – self closing.
  • Clear openings up to 1,120mm wide x 2,1000mm high.
  • Latch-less design.
  • Optionally available with ‘normally held open’ function.
  • Capable of withstanding reciprocating pressures in excess of +/- 7.5kPa (both sides).
  • Fatigue loading in excess of 106 cycles per year, + 25 year design life.
  • Manufactured in carbon steel.
  • Rhino Sliding Pressure and E90 Fire Resistant Doors LEARN MORE

Rhino Hinged, Latched FD30, Fire and CPNI

  • A 30 minute integrity fire door, tested in accordance with EN1364-1.
  • Variant of the standard Rhino-HC high security door.
  • Primarily a high security attack delay door tested to UK Government CPNI Enhanced level.
  • Single swing configuration, available as single leaf, double leaf and unequal leaf.
  • Clear openings up to 2,800mm wide x 2,400mm high.
  • High security locking system.
  • Manufactured in carbon steel.
  • Rhino Hinged, Latched FD30, Fire and CPNI LEARN MORE

Rhino-HF+ Hinged Fire Door with LPS 1175 Security Ratings as Standard

  • Tested and rated up E240 (integrity) to EN1634-1, Certifire third-party certified and Fire Test House assessed for leaf areas of up 3.95m²
  • Tested and certified to LPS 1175 physical attack levels SR2, SR3 and SR4 (three products)
  • Single, unequal and double leaf configurations, with optional glazing, over panels and side panels
  • Optional project-specific blast and air pressure resistance ratings supported by independently verifiable calculations
  • Rhino-HF+2/3/4 Hinged Fire Rated Door with SR2/3/4 Rating LEARN MORE